Tig DC-AC/DC Arc - Panasonic
400 - TX3
- Higher weld stability
- Higher power IGBT components in the main circuit ensure smooth output wave form resulting in greater arc stability even at 4A output current
- Spot welding functionality
- During argon spot welding, TX3 offers pre-setting of spot current and time
- Excellent manual welding performance
- Stepless regulation of arc force current reduces issues of stick adhension, arc break and excessive spatter during welding
- Reliability even in rugges envirionments
- Dust proof and superior water proof design for greater endurance more efficient cooling
- Complies with IP23 enclosure class
- Easy to assemble connectors
- Remote operation is possible
| Parameters | Specification |
|---|---|
| Input voltage | 415, +10%, -10% |
| Power control method | IGBT inverter type |
| Input power frequency (Hz) | 50 |
| Rated input capacity(KVA/KW) | 13.9/13.2 |
| Rated output current(V) | 400 |
| Rated output voltage | 26 |
| Rated duty cycle(%) | 60 |
| Rated output voltage at no load(V) | Anti-electric shock [ON]:13, [OFF]:73 |
| Output current range - tig(A) | 4~400 |
| Output current range – manual arc welding(A) | 10.2~26 |
| Output voltage range – Manual Arc Welding(V) | 20.8~36 |
| Crater current(A) | 4~400 |
| Pulse current(A) | 4~400 |
| Up slope time(S) | 0 OR 0.1~5 |
| Pre-flow time(S) | 0 OR 0.2~10 |
| Post flow time(S) | 0.3 |
| Spot welding time(S) | 2~20 |
| Spot welding time(S) | 0.2~5 |
| Pulse frequency - Low (Hz) | 0.5~30 |
| Pulse frequency – Mid (Hz) | 10~500 |
| Pulse width (%) | 5~95 |
| Control mode for crater current | THREE CONTROL MODES FOR CRATER, i.e. “YES”, “NO” and “REPEAT” |
| Arc Starting Mode | High-Frequency arc starting |
| Enclosure Protection Class | IP23 |
| Insulation Class | H (B Class for Main Transformer) |
| Cooling Mode | Air Cooled |
| Dimension (W X D X H) (mm) | 327 X 555 X 602 |
| Mass (KG) | 43 |
- 1 Year
