Projection Welding
Home / Projection Welding
Projection Welding
Features :
1. selection operation with standard MIG gun or spool.
2. adjusting ramp up the thread, post gas time, time to burn the final wire.
3. overload protection. Complete with MIG-MAG, spool gun, wire and ground clamp, pressure reducer to 2 gauges.
| MODEL | PWSP | PWSP/10 | PWSP/12 | PWSP/15 | PWSP/20 | PWSP/25 |
| KVA Rating | 8 | 10 | 12 | 15 | 20 | 25 |
| Mains supply 50 cycles | 230 V | 440 V | 440 V | 440 V | 440 V | 440 V |
| No of Phase | 1 Ph | 2 Ph | 2 Ph | 2 Ph | 2 Ph | 2 Ph |
| Primary Current Nominal | 15 A | 15 A | 25 A | 37.5 A | 50 A | 60 A |
| Secondary Voltage | 1.4 - 2.8 V | 1.4 - 2.8 V | 2 - 4 V | 2.15 - 5 V | 2.15 - 5 V | 2.15 - 5 V |
| Voltage control steps | 6 | 6 | 8 | 8 | 8 | 8 |
| Max Iron &Steel Welding Thickness |
1.6+1.6 | 2+2 | 2.5+2.5 | 3.15+3.15 | 4.5+4.5 | 5+5 |
| Throat Depth | 15" | 15" | 16" | 16" | 16" | 16" |
| Throat Gap | 9" | 9" | 9 1/4" | 9 1/2" | 9 1/2" | 9" |
| Duty Cycles | 60% | 60% | 60% | 60% | 60% | 60% |
| Cooling Method | Water | Water | Water | Water | Water | Water |
