CUT (Air Plasma) Inverters - Hitronics
CUT 160
CUT 160 is one of the machine CUT Inverter series.
- Advanced high frequency inverter technology, optimised design, high duty cycle and low energy consumption.
- Plasma cutting excellent for cutting carbon steel, stainless steel and copper.
- Air pressure regulator allows operations under high gas pressure condition.
- Step - less adjustment for cutting current and digital display.
- Widely used in steel structures, manufacturing industries and automobile maintenance.
- Contains electric circuit to protect against over-current, over heat, over voltage and short-voltage, safe to operate.
| Parameters | Specification |
|---|---|
| Phase | Three |
| Input Voltage (VIN) | AC 415V + 15% |
| Input Frequency (HZ) | 50/60 |
| Rated Input Power (KVA) | 29 |
| Rated Input Current (Amp) | 44 |
| No Load Voltage (V) | 320 |
| Output Current Range (A) | 20-160 |
| Rated Output Voltage(V) | 144 |
| Duty Cycle (%) | 60 |
| No Load Loss (W) | 100 |
| Efficiency (%) | 85 |
| Power Factor | 0.93 |
| Insulation Grade | F |
| Housing Protection Grade | IP 21 |
| Arcing Way | HF (Pilot Arc) |
| Air Pressure | 5.0 - 6.0 |
| Cutting Plate Thikness (Max MM) | 1-35 / 1-50 |
| Weight (KG) | 60 |
| Diamention (MM) | 670 x 320 x 640 |
- Cutting torch
- Earth clamp with cable
- Air filter
- Hose
- Hose clamp
- 1 Year
