Mig MAG FCAW - Panasonic
GY3 - 500
- Facilitates consistently high quality welding
- Stable welding performance across entire current range
- Excellent quality even in low current range of 50-120 A
- Stainless steel MIG welding machine
- High precision full digital control ensures soft and stable arc
| Parameters | Specification |
|---|---|
| Rated input voltage (V) | 415 VAC (allowable fluctuation range : 374 to 456V) |
| Rated Frequency (Hz) | 50/60Hz(Common) |
| Number of phase | 3 phase |
| Rated Input (KVA) | 23.3 |
| Rated input (KW) | 22.4 |
| Maximum non load voltage (V) | 68DC |
| Rated output current (A) | 500 DC |
| Rated output voltage (V) | 45 DC |
| Output current adjustable range (A) | 60-500 |
| Output voltage adjustable range (V) | 17-45 |
| Rated duty cycle | 100 |
| Power control method | IGBT Inverter type |
| Memory | 9 ch, reproducible storages |
| Applicable welding method | CO2, MAG, Stainless steel MIG |
| Wave from control method | Digital control: -7 (small) to + 7 (large) (standard :0) |
| Sequence | Main welding, main welding – crater (“Crater repeat” available) Initial – main welding – crater (“Crater repeat” available) Arc Spot |
| Applicable shielding gas | CO2(100%) MAF(80% Argon & 20% CO2) Stainless Steel MIG (98% Argon and 2% Oxygen) |
| Applicable wire size (diameter) | 1.2, 1.4, 1.6 |
| Applicable wire material (Note) | Mild steel (MS) Flux cored mild steel(MS-FCW)stainless steel Flux cored stainless steel (SUS-FCW) |
| Gas purge Time | 1 second – 1 minute /continuous |
| Pre flow time (S) | 0.0 – 5.00 (increment of 0.1) continuous |
| Post flow time (S) | 0.0 – 5.00 (increment of 0.1) continuous |
| Arc spot time | 0.3 – 10.00 (increment of 0.1) continuous |
| Input power terminal | Terminal block (for 3 phase, ms bolting) |
| Output terminal | Copper terminal with M8 bolting |
| Dimension (WxDxH)(mm) | 380 X 550 X 815 |
| Mass(KG) | 60 |
- 1 Year
