Mig MAG FCAW - Panasonic
KR2 - 500
- Six phase thyristorised system gives ripple-free DC output for superior quality welding
- Synergic mode (Unified mode) is available for easy setting of current and voltage
- Fresh tip treatment and burn-back time control are adjustable
- Secondary short circuit protection is a standard function
- Arc sensitivity is selectable by changing the tap of the reactor
- Crater current and crater voltage controls on front panel
- Crater selection switch, gas check switch, solid/FCW selection switch, wire diameter selection switch are available on the front panel
- Work on 50/60 Hz frequency in power supply
| Parameters | Specification |
|---|---|
| INPUT | |
| Rated input voltage (V) | 415, +10%, 10% |
| Phase/Freq. (no./Hz) | 3ph/50-60 |
| Max. Input KVA @ 415 Vac | - |
| @50% Duty Cycle (KVA/KW) | - |
| @60% Duty Cycle (KVA/KW) | 31.9/28.1 |
| OUTPUT | |
| Rated Current Range (amps) | 60-500 |
| Rated Output Voltage (V) | 16-45 |
| Welding Current (40 C) | |
| @60% Duty Cycle (Amps) | 500 |
| @100% Duty Cycle (Amps) | 387 |
| GENARAL | |
| Conformance to International Standards | - |
| Applicable Shielding Gas | CO/CO2+Ar |
| Insulation (Class) | H |
| Cooling(Type) | Forced Air Cooling |
| Dimensions(mm) | 736 x 675 x762 |
| Weight(KG) | 158 |
| WIRE FEEDER | YW-50KB3 |
| Rated Welding Current (Amps) | 400 |
| Applicable Wire Diameter(mm) | 1.2, 1.4, 1.6 |
| Weight (KG) | 10.5 |
| WELDING TORCH | YT-50CS4 |
| Rated Welding Current (Amps) | 500 Amps, 60%(CO2) 450 Amps, 60% (CO2+Ar) |
| Duty Cycle Continuous | 385 Amps, 100% (CO2) 345 Amps, 100% (CO2 + Ar) |
| Applicable Wire Diameter(mm) | 12, 16 |
| Cable Length(meter) | 3 |
| Weight (incl. Cable)(KG) | 3.6 |
- 1 Year
