Mig MAG FCAW - Panasonic
RX1 - 500
- Inverter-based digital wave control GMAW and FCAW welding outfit
- Higher efficiency and higher power factor results in greater power saving
- Designed to work even under high ambient temperatures up to 500C
- Light weight and compact MIG/MAG/FCAW welding outfit
- Unique design of three layer and four room dust-free structure
- RX1 series is manufactured as per Std. IEC 60974-1:2000/GB 15579.1:2004
- Fresh tip treatment and burn-back time control are adjustable
- Works on 50/60Hz frequency in power supply
- Equipped with synergic mode (unitary function) in which welding voltage is set based on the welding current value automatically. The voltage can be adjusted finely to fit the beast current values
- Digitally controlled waveform enables superior arc characteristics
- Over voltage and under voltage protection
- Overheating protection
- Single phasing protection
- Protective 8 Amps fuse for protection of wire feed motor
| Parameters | Specification |
|---|---|
| INPUT SUPPLY | |
| Voltage (V) | 415, +15%, -20% |
| Phase/Freq (No./Hz) | 3ph/50-60 |
| Max, input KVA @ 415Vac | - |
| @ 60% duty cycle (KVA/KW) | - |
| @ 100% duty cycle (KVA/KW) | 23.1/22.2 |
| OUTPUT | |
| Rated Current Range(Amps) | 60-550 |
| Rated output range (V) | 17-41.5 |
| Welding current (400C) | |
| @60% Duty cycle (Amps) | - |
| @100% Duty Cycle (Amps) | 500 |
| General | - |
| Power control method | IGBT inverter controlled |
| Digital display | 4 digit 7 segment LED Display |
| Wave from control | Digitally controlled wave form |
| Welding sequence | a. Main welding |
| Ingress protection (Class) | IP 23S |
| Insulation (Type) | H |
| Cooling | Forced air cooling |
| Power Factor (Degree C) | >0.9 |
| Operating Temperature | -10 to 50 |
| Dimension (L X B X H) | 545 x 380 x570 |
| Weight (KG) | 60 |
| Wire feeder | |
| Rated welding current (amps) | 500 |
| Applicable wire diameter | 1.2, 1.6 |
| Cable length | 1.8m (gas hose 1.8m) |
| Weight | 10.5 |
| Wire feed speed | 5.3-20.1 |
| Duty cycle | 60 |
| Welding torch | 500 |
| Duty cycle (10 min cycle) | 500 Amps, 60% (CO2) 450 Amps, 60% (CO2+Ar) |
| Duty cycle (continuous) | 385 Amps, 100% (CO2) 345 Amps, 100% (CO2+Ar) |
| Applicable wire diameter(mm) | 1.2, 1.6 |
| Cable length(meter) | 3.6 |
| Weight (incl. cable)(KG) | 2.8 |
- 1 Year
