MIG/MAG Inverters - Riland
MIG 175mos
A single phase MIG Inverter. Perfect welding in low and medium thickness materials including Stainless Steel, Mild Steel, CuSi3, SST, Al Al Si12 MG5.The MIG 175 is equipped with a Euro style socket for the connection of the MIG torch
- Advanced inverter technology delivers outstanding arc with low spatter.
- Auto-Protection against over-voltage,over-current and over-heated.
- Knob to adjust the welding voltage.
- Knob to adjust the welding current.
- Inductance Control for arc stability and spatter control.
- Perfect welding in low and medium thickness materials including Stainless Steel, Mild Steel, CuSi3, SST, Al Al Si12 MG5.
- Equipped with reverse polarity for special wire Gasless Welding.
- The wire feeder can accommodate 200mm spools, and allows Gasless Welding by means of the revers switch.
- Smaller, lighter and portable, this equipment is protected by a solid metal casing.
| Parameters | Specification |
|---|---|
| Rated Input Voltage(V) | AC220V±15% 1P |
| Rated Input Current(A) | 29.7 |
| Input Frequency (HZ) | 50/60 |
| Rated Input Power(KVA) | 6.5 |
| Current Range(A) | 40-175 |
| Output Voltage Range(V) | @ MIG：15-26 |
| Open Circuit Voltage(V) | 56 |
| Duty cycle at maximum current | 60%@25℃ |
| Power Factor | 0.73 |
| Efficiency(%) | 80 |
| Wire-feeding Mechanism | Internal |
| Wire-feeding Speed(M/min) | 2-15 |
| Protection Grade | IP21 |
| Wire Diameter(mm) | 0.6~1.0 |
| Weight(KG) | 20 |
| Dimension(mm) | 482*197*466 |
- 1 Pcs Power Source
- 3M QTB-500A gun and cable assembly
- 4M cable with 500A electrode holder
- 4M cable with 600A clamp
- 1 set Janpan type wire feeder
- 1 Year
